Marine RV Fiberglass Restoration System

I do car detailing and my cars have to look perfect new all the time. That has to go the same for my trailer. Got a used trailer inside was like new and I think this trailer sat unused for a few years in the sun. Now I need to get the oxidation off this used trailer we just bought. I tried regular Mcquires for cars clearcoat cleaner compound on a 3000 rpm polishing wheel. Not good enough.I ordered through Amazon McGuires RV 3 step oxidation compound, polish and wax. Fiberglass is a tougher finish then clearcoat and this Oxidation compound is designed to cut through and really remove all the garbage and oxidation built on the finish. It restored my dull slightly off white finish back to bright white and very shiny. As well as me tired, But its well worth the effort. Their may be more pricey 3M products that may cut the oxidation better, faster .............but my experience is with this product. If you have very heavy oxidation you may have to go over a section over a few times to cut and remove years of neglect. But if Gel coat is still good and you want to restore your RV keep at it, Its not an easy job. But if you had someone do it for you its could cost you a couple thousand to do it right. Its a long process . But you can achieve the end result with right high speed machine, right pad not to burn and right kind of Compound. More so the time to keep at the job. (UPDATE June 2013) I recently bought a used motorhome and went through the same process as I did with trailer in this original review from 2 years ago, JUST like the trailer it brought back the shine to new. I did discover that using the machine and just the McGuires fiberglass restorer compound. The wax in kit is great stuff but I find myself going back to a wax call Protect-all RV wax I used it for many years and following up with The Protect-all wax even brought and held the luster a long time plus the wax has UV inhibitors in it so it is a complete wax for any fiberglass or car finish. Tried McGuires Flagship wax too, makes it sparkle but it goes on heavy and comes off harder leaves a film if you don't keep changing to new towels!!!!!!!!!!! Once you get your finish back the Protect-all is all you need to keep it that way forever as long as ya do it once or twice a year. Protect-all goes on easy comes off easy leaves high long lasting shine WARNING!........Their is nothing that will work without the right tools, time, strength and energy involved in taking on this big a surface on 29 ft RV with slide outs. You need a polishing wheel ( Not an orbital buffer they are not powerful at all. I tried the dual action kind they are easier to control but I like the speed of reg car polisher and prefer the 10 lb 7 inch 3000 rpm wheel using McGuires medium cut raspberry colored foam pad.This item: Meguiar's 7" Soft Buff 2.0 Foam Cutting Pad by Meguiar's $10.29 on Amazon......... Made just for taking oxidation and swirl morks safely out of the fiberglass and car finishes. Here is URL with polisher I bought on Amazon and have used this buffer on many cars for past 4 years and it has held up very well.....http://www.amazon.com/gp/product/B000M5ZXDM/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1 I started on the full molded fiberglass cap front. IT had a dull SATIN LIKE white finish on it very minimal shine. After applying the compound with 3000 rpm wheel, polish then wax Its as shiny as a new trailer or a new bathroom tub at Lowes. LET ME TELL YOU THE SHINE JUST AFTER USING THE COMPOUND IS AMAZING! IT works as its advertised. Then you follow up with the polish on a rag and wipe it off right away. Polish takes off any film left by compound and adds oils back to finish. They have a pure wax but it has no UV blockers in it so I went back to what I used and loved for years on trailer---Protect all wax.Lack of UV blockers is what oxidizes the unit. Its a very hard job. I would say I would charge 500.00 plus to do someone else s but would never take on someone else s unit.Takes per side about 4 hrs but I have to stop because it will wear you out holding polisher tightly and letting wheel and compound do its job.Its a good workout. But the end results are well worth the time. My trailer had medium oxidation, but people who used it that claim they started with a chalky finish have had the same end results based on the reviews I read on Amazon.I AM sure with a BAD OXIDIZED chalky finish you will need to constantly clean the oxididation it removes off the pad.But years of not cleaning and waxing require the pain staking process that goes along with removing all the dead finish to get down to fresh. Please note.......... My trailer is 5 years old and though it was oxidized some but a dull shine was still apparent, I knew the gel-coat seemed still good. If your unit has been neglected for say 10 years or more it may be possible that the oxidation has gone beyond the Gel-coat finish which gives the fiberglass its shine. If so, Your really have nothing to shine back up. 3 part restorer will remove the oxidation then the polish and wax will add oils back to finish but without the high gloss shine if the gel-coat is gone. Also the dullness may return as the oils dry out over the following weeks of months depending on fiberglass gel coat in bad condition. I would try a small section on an older unit and see if you get that desired shine before spending your efforts to restore the entire unit. If that is the case their are other polymer finishes that coat over the dead finish once you clear off dead oxidation and create a new shiny type coating that they claim will hold a nice shine back to old finish. I am sure you can see them on the net. People seem to like these products as well. I would only consider going that route if you indeed do not have a chance of restoring the gelcoat. At that point you have nothing to lose but you will have to reapply that polymer finish every year. But it seems easy as waxing the whole unit. But at least you still have an option. Tip.... For cleaning deep dirt on caulking I care-full use lac-quire thinner on a small clean rag just folded to touch the caulking only. The thinner will melt the top layer of caulk every so slightly and remove the dirt instantly. Let it dry and then follow over the area with the wax, the wax will remove the film left behind and leave you trailer caulk look like new again. This item: Meguiar's 7" Soft Buff 2.0 Foam Cutting Pad by Meguiar's $10.29 effect the fiberglass Wont work if caulk is silicone.Try on small area out of site 1st to see results on your unit.

Excellent product took my oxidation rite off and left a great shine. It took two kits to do my 38’ fifth wheel. Took some time but it’s worth it

Great for polishing up my boat last spring, however the wax did nothing to prevent water spots, smudges and marks over the season. But easy enough to re polish the boat next spring

Loved the results. It made my 2005 RV look close to new. The parts of my RV that gets most of the sun looks much better and the chalkyness of the fiberglass is no longer present.

Ahoy there, fellow boat and RV enthusiasts! Are you tired of your once-gleaming gel coat and fiberglass surfaces looking like they just survived a rough sea voyage? Fear not, for Meguiar's M4965 Marine/RV Fiberglass Restoration System is here to rescue your vessel or mobile home from the jaws of dullness! 🛠️ Boat Fiberglass Repair Kit: This kit is like having a toolbox full of magic tricks for your boat or RV. With the Oxidation Remover, Boat Polish, and Boat Wax, it's your one-way ticket to restoring that showroom shine. It's so versatile that even Houdini would be jealous! 💥 Oxidation Remover: Say goodbye to those pesky moderate defects and oxidation that have plagued your surfaces for far too long. This remover is like a superhero, swooping in to save the day by enhancing gloss and shine. Your boat or RV will sparkle like it's auditioning for a disco ball! 🌟 Boat Polish: If your boat or RV were a celebrity, this would be their personal stylist. The rich polishing oils work their magic, leaving your vessel or home with a high-gloss finish and maximum shine. You'll feel like you're cruising in Hollywood style! 🛥️ Marine Wax: It's not just wax; it's a suit of armor for your precious surfaces. This marine wax delivers durable, long-lasting protection that can stand up to the elements. Your restored surfaces will shine brighter than a supernova! 👋 Versatile Application: Whether you're a hands-on DIY enthusiast or prefer the finesse of a Meguiar's Dual Action Polisher, this kit is your trusty sidekick. It doesn't discriminate; it just wants to make your boat or RV look amazing! In conclusion, the Meguiar's M4965 Marine/RV Fiberglass Restoration System is the ultimate gift for boat and RV owners who want their prized possessions to shine brighter than a lighthouse. It's the secret sauce that turns ordinary surfaces into extraordinary reflections of beauty. Get ready to sail or cruise in style, and let your gel coat and fiberglass surfaces be the envy of the marina or campground! 🌊🏕️🌅

Works great

Its good, but there's better products. I finally got around to using this on a 2006 WW 26ft toyhaluer. If you're expecting a quick easy job, then do it yourself polishing is not for you. I've been detailing for many years, so this isn't my first rodeo. Like "Customer Ed" said, this is a machine job, not an orbital or hand job. You need a quality polisher, and good wool pads based on your situation, and the time to be patient. I use a Makita 9227C 7-Inch Hook and Loop Polisher/Sander for the better part of 10 years now - great machine. First Meguiars #49 Oxidation Remover will remove most of the oxidation in one pass after you've spread it out and polished till the compound is no longer hazy, provided you've put enough on and spread evenly around and worked small areas like 2x2ft. However, this will not get 100% out, but does leave a glossy surface - depending on your color, amount of oxidation, etc. In my case, working on white gel coat, you could see there was still some haziness left after using this product. Pictures 2,4,5 show some of the hazy areas (not compound residue) left over after using the #49 (the day is completely overcast, so the clouds you're seeing are areas that didn't polish out 100% with the Meguiar's) I switched over to a 3M Imperial compound and had much better results, 3M spreads better, cuts through the oxidation in one pass leaving no haze behind like the Meguiars did. The abrasives dissipate fast and you'll be hard pressed to burn through the coat or decal unless you're really trying. To be fair, #49 didn't have any burn issues either, but I had to use much more material as it didn't spread out very well. I had the 3M stuff left over from my days working in a fiberglass boat factory. I would highly recommend a 3M product over this - yes you'll spend more money on it, but doing the work once with quality results is what you want when polishing a large boat/RV. #45 High Gloss Polish made a negligible difference as the second step in this 3 step process. Didn't remove any haziness left behind by the #49. Bottle states that "Special formula restores vital oils". I'm no scientist, so I can't really comment on that. But the bottle also states "Especially effective on dark colors", since I was working on white, could explain why I didn't get much affect from this. #56 Wax goes on pretty good. I used a orbital buffer to apply it and microfiber hand work to take it off. Don't go too thick and it will come off easier once dry, if you go to thick in one area, just come back to it shortly after and reapply to level it out before removal. I did the front of the trailer about 1.5 years ago and its been rewaxed a couple times since. The haziness I spoke of earlier is coming back, and more noticeable; I will redo the front polishing with the 3M Marine Compound and Finishing Material. The wax has done a decent job protecting the front surface though, but will probably look to another wax once this bottle runs out. Also the #49 did not last the whole job on a 26ft toyhauler, I got about 2/3rds complete before switching to the 3M compound I had left over from my marine industry days.

1989 Wellcraft stored outside. Gelcoat was very chalky, would have dust on hand when wiped. My boat really should be wet sanded if I want a full restoration of way the color should be. This product with the first step using M49 and buffer with foam pad did a great job of removing the haziness and making the red color look better. The polish M45 really made it shine and have deep mirror like gloss. After these two steps a through wash and dry then applied the wax M45 letting it soak in for half a day. I did notice after 2 days in salt water the wax was worn off below the water line. Also a bit disappointed I left it uncovered overnight under pine trees and has some brown stains on the bow that won't wash off even with purple power. I would buy again but it's not a cure all.

Good quality product

Le devolvió el acabado original a mi lancha de fibra de vidrio. Recupero el brillo y color original.

Great stuff easy to use

I purchased the kit a few weeks back. So far I have only used the heavy duty oxidation remover and am very pleased with the results. There is a definite improvement in the look and feel of the smooth surfaces on our yacht. I can only presume that when I have finished the process with the polish and wax that I will be extremely satisfied. I have given it a 4/5 as I have not tried the other two products yet, to rate them.

I would have given 5 stars if it had done the job 100% but overall it did 90% of what it's says it does but the difference speaks for its self just look at my pictures one side done still got the other side to do but it's long and slow work I was over 1hr just on this one corner and I was using a buffer machine and pads hopefully this helps you make your own mind up on weather or not to buy it as it is a bit expensive