Dinner Chairs Upholstered Accent Fabric Dining Chair with Solid Wood Legs for Kitchen Living Room Set of 2 (Natural Leg)

These are not top of the line in quality, but for the price, they're pretty dang good. They look nice in person and feel sturdy. My husband is over 200 lbs and does fine in them. They are definitely comfortable.I had a couple issues that I was able to resolve. First, one of the seats had some sort of stain that was easily removed with Resolve and some towel rubbing action. Second, the front legs will need some troubleshooting. I recommend attaching the front legs first. Then attach the seat to the chair back. You'll have to tighten the seat so it stays together, then flip the chair up and check to see if the legs are even. If not and you have a gap (like in my photo), you have to angle the whole seat toward the short side. Other than that, they're pretty easy to assemble and you won't need any tools.

I love these chairs! And I was worried that they would be junk because they were so affordable, but I love them!!! They were very easy to put together, the look very expensive, well made, and above all, they are so comfortable!!!! I wanted cushy dining room chairs and I was worried these would be stiff, or too firm, but they are so comfortable!! Most comfortable chairs in my house! I'm going to order 2 more!

Overall, I'm satisfied with the look of these chairs. I have not used them yet but they look good for the price. However, they were a horror to assemble. My husband had to cut the allen wrench to fit into his drill in order to drive the screws into the screw fittings. There's no way it could have been done by hand. The first of four chairs was almost impossible to assemble because the holes weren't lined up precisely. The other three chairs were easier to assemble, but as I noted, you will need a drill fitted with the allen wrench to drive the screws deep enough into their corresponding opening. Once assembled, all four chairs were not even--there is a wobble on each chair. Fortunately, the chairs will go on carpeting. Otherwise, the legs would have to be cut or adjusted somehow to make them even. I would not purchase these chairs again. As an aside, the whitewashed legs are very pale--almost no color. I whitewashed the legs with diluted cream-colored paint.

I'm very happy with these chairs. I ordered 6 for our large dinning room table. The first one was tough to put together, but I realized there was a trick to getting the bolts for the back and the seat to line up. Once I figured it out, I was able to put the remaining 5 chairs together in about an hour (I'm currently 6 months pregnant, so if I can do it, anyone should be able to). I was most concerned about the legs being uneven or wobbly (my biggest pet peeve). The instruction state to tighten the legs about 3/4, then sit on the seat, then finish tightening. Not one of our 6 chairs is wobbly! Also like the place mats (pictured) and the furniture leg pads it came with! Great chairs for the price... highly recommend!

Pain in the ass to put together, one was cut wrong and I had to chip away at the wood and sand to get front legs to fit. Now I like them but white fabric kitchen chairs 🤦🏻‍♀️*****edited review ******Serious quality control issues. Because I’m a genius and I wanted 4 matching chairs I ordered 2 more thinking the miscut chair was a fluke- WRONG!!!! Not only is one of the chair leg holes cut wrong, there is also a dark spot on the upholstery and 2 if the legs were just floating around in the box, they also have minor damage. Do NOT recommend due to quality control issues, sad because they would be nice chairs. Now I get to call amazon and I’m sure they’ll say I’m screwed because they are not prime🙄

These are hard to assemble I had to get creative with the assembly. Then once I figured the trick it was so easy to put them together. The holes on the back and legs don't align which makes it difficult to put the screws. They should change the directions provided.So I had to first loosley put the screws on the back holes of the back of the chair as shown on picture then I placed the legs on the backs this helped align the holes. I put the screws in the front holes and tightened loosley. I took out the screws that were in the back holes and properly screwed on.Not sure this makes sense....but just be creative when assembling because the instructions don't workOverall it's a beautiful strurdy chair

Chairs are very comfy and look great! Easy to put together and legs were even because we followed others’ advice. Basically put chair right-side-up to make sure chair is even before fully tightening the legs. No complaints on these chairs whatsoever!!

My wife bought these chairs because of the looks. They do look nice but the assembly was questionable. The threaded inserts in the seat didn't line up with the hole on the leg. So that was a pain to force them into place with multiple cross-threading and starting over. I was missing a lockwasher. Even when I thought I had it assembled correctly it still feels a little flimsy. Personally I don't sit in these chairs. Oh and they are not as white as they look. Definitely a cream color.